We can offer customers a wide range of sizes and series speed reducers, we can also be customized according to customer requirements. And expressly, our price is very competitive because we are manufacturer, we own the source. Hope that we can serve you with our professional experience from now on.Whatsapp/wechat : 8618015057952 ,
We are a professional manufacturer with 10 years’ experience, welcome for the inquiry and visiting.
WP reducer model:
1.Single speed reducer: WPA, WPS, WPO, WPX,WPDA,WPDS,WPDO,WPDX,WPKA,WPKS,
WPDKA, WPDKS
2. Universal speed reducer:WPW, WPWA, WPWS, WPWO, WPWX, WPWT, WPWV, WPWD,
WPWDS, WPWDO, WPWDX, WPWDT, WPWDV, WPWK, WPWKA,
WPWKS, WPWKO, WPWKT, WPWKV, WPWDK, WPWDKA,
WPWDKO, WPWDKT, WPWDKV, WPDKZ WPDZ.
3.Double speed reducer: WPEA,WPEDA,WPES,WPEDS,WPEO,WPEDO,WPWEKO,WPWEDKO,WPWEK,
WPWEDK, WPEKA,WPEDKA,WPEKS,WPEDKS,WPWE,WPWED,WPEX,WPEDX
4. Multistage speed reducer: WPEEDA,WPEEO.
WP reducer Sizes: 40, 50, 60, 70, 80, 100, 120, 135, 155, 175, 200,250
Gearing arrangement is worm
Motor power is up to 15KW
Mounting position: foot mounted and flange mounted
Ratio Reduction: 1) single speed reducer: 10-60. 2) double speed reducer: 200-3600
3) universal speed reducer: 10-60
Material: iron casting
Color: blue or green
Inner packing by carton, outer packing by wooden case.
Gearbox Parameters:
|
Type: |
Gearbox WPA |
|
Model: |
WPA 40,50,60,70,80,80,100,120,135,155,175,200,250 |
|
Ratio: |
10-60 |
|
Color: |
Blue/Green Or On Customer Request |
|
Material: |
Housing: Die-Cast Iron cast |
|
Worm Gear-Copper-9-4# |
|
|
Worm-20CrMn Ti with carburizing and quenching, surface harness is 56-62HRC |
|
|
Shaft-chromium steel-45# |
|
|
Packing: |
Carton and Wooden Case |
|
Bearing: |
C&U Bearing |
|
Seal: |
KSK |
|
Warranty: |
12Months |
|
Input Power: |
0.12kw~15kw |
|
Usages: |
Industrial Machine: Food Stuff, Ceramics, Chemical, Packing, Dyeing, |
|
IEC Flange: |
B5 |
|
Lubricant: |
Synthetic&Mineral |
The VF series worm gear motor is designed with more advanced materials and manufacturing technology. It has the characteristics of compact structure, reliable quality, a variety of installation positions and torque limiter, etc., helical gear-worm gear and double worm gear reducer can be provided in combination More drive systems.
The basic structure of RV series aluminum alloy worm gear reducer is mainly composed of transmission parts worm gear, shaft, bearing, box and accessories. It can be divided into three basic structural parts: box body, worm gear, bearing and shaft combination. The box is the base of all the accessories in the worm gear reducer. It is an important accessory that supports and fixes the shafting components, ensures the correct relative position of the transmission accessories, and supports the load acting on the reducer. The main function of the worm gear is to transmit the motion and power between the two interleaved shafts, and the main function of the bearing and the shaft is to transmit power, operate and improve efficiency.
Some accessories of worm gear reducer are explained as follows:
Shell: aluminum alloy (frame: 025-090) cast iron (frame: 110-150);
Worm: 20Cr steel. Carbon and nitrogen co-infiltration treatment (maintain the tooth surface hardness HRC60 after fine grinding, and the hardness thickness is greater than 0.5mm);
Worm gear: wear-resistant nickel bronze with special configuration;
Oil cap/aerator, mainly used to discharge the gas in the case of worm gear reducer;
The end cover is divided into a large end cover and a small end cover. The end cover is used to fix the axial position of the shaft system components and bear the axial load. The two ends of the bearing seat hole are closed with bearing covers;
The oil seal is mainly used to prevent the leakage of the lubricating oil inside the chassis and increase the use time of the lubricating oil;
The oil drain plug is mainly used for draining dirty oil and cleaning when changing lubricating oil;
Oil mark cap/oil mark, mainly used to observe whether the amount of oil inside the casing of the worm gear reducer meets the standard
Q: Are you trading company or manufacturer?
A: We are manufacturer.
Q: How long is your delivery time?
A: Generally it is 5-7 days after the goods are produced. or it is 10-15 days if the goods are large in quantity.
Q: Do you provid samples?
A: Yes, we could offer the sample if you order more than 500 sets, but we don’t pay for the freight. And the fee will be return after the transaction’s finishing.
Q: What information shall we give before placing a purchase order?
A: You just need to offer the size of the dimensions of the worm shaft and the ratio.
Quality inspection procedure:
We have 20 QC/QA workers.10 strict QC processes including incoming materials QC, IPQC 10 Ageing test QC100% products will go through a 24-hours ageing test QC)before shipping.
Pls contact us for any questions.Hope we can establish a good relationship.
Hot Tags: worm gearbox with shaft, China, manufacturers, suppliers, wholesale, customized, quotation, low price, nmrv worm gearbox, drill speed reducer, High Efficiency Worm Gearbox WPWDKS 175, WPA60 Cast Iron Gearbox, Worm Gearbox Speed Reducer WPWDA 60, Worm Gearbox Speed Reducer WPWDO 70，WP Series Iron Worm Gear Reducer Variable Speed Reducer