How to Use and Maintenance of Reducer?
Add lubricant
Unscrew the fixed refueling plug, add a correct type of lubricant to a position slightly above the center line of the oil dipstick or oil mirror, and then install the plug; the reducer (motor) of the car that has been refueled does not need to be refueled. The speed changer is used to change or adjust the machinery equipment or energy change machinery and equipment, and has been widely used in various fields such as production, processing, manufacturing, and machinery. Reducer is an independent component composed of gear transmission, worm transmission, and gear-worm transmission enclosed in a rigid shell. It is often used as a reduction transmission device between the original moving part and the working machine. It plays the role of matching the speed and transmitting torque between the prime mover and the working machine or the actuator. It is widely used in modern machinery. The reduction box is also called a reducer or a reducer. It works according to the principle that the prime mover is connected to the reduction box, and the reduction box is connected to the working machine. It is a power transmission equipment.
1. Start
Before starting, students must analyze the following research
objectives, check and make records
(1) Oil level height
(2) Lubricating oil cooling method or oil supply control system design pipeline tightness
(3) Effectiveness of shaft seal
(4) Rotating machinery parts companies are not in contact with other parts
2. Run
When the reducer motor is started for the first time, if possible, it should be allowed to run without load for several hours. If there is no abnormality, it can be gradually loaded and loaded at an appropriate time;
In operation, the reducer must be monitored
Oil temperature (During the continuous operation and management process, the design of the reducer is different. The temperature of the mineral oil used during continuous development is 90 ℃. At higher temperatures, you must use your own synthetic oil for certain problems. Improve the work in a short time The high temperature range can reach 100℃);
Changes in operating noise;
Possible leaks in the housing and shaft seal;
The correct oil level;