We can offer customers a wide range of sizes and series speed reducers, we can also be customized according to customer requirements. And expressly, our price is very competitive because we are manufacturer, we own the source. Hope that we can serve you with our professional experience from now on.Whatsapp/wechat : 8618015057952 ,
We are a professional manufacturer with 10 years’ experience, welcome for the inquiry and visiting
Ratio Reduction:
1) single speed reducer: 10-60.
2) double speed reducer: 200-3600
3) universal speed reducer: 10-60
Material: iron casting
Color: blue or green
Inner packing by carton, outer packing by wooden case.
Gearbox Parameters:
|
Type: |
Gearbox WPKO |
|
Model: |
WPKO 40,50,60,70,80,80,100,120,135,155,175,200,250 |
|
Ratio: |
10-60 |
|
Color: |
Blue/Green Or On Customer Request |
|
Material: |
Housing: Die-Cast Iron cast |
|
Worm Gear-Copper-9-4# |
|
|
Worm-20CrMn Ti with carburizing and quenching, surface harness is 56-62HRC |
|
|
Shaft-chromium steel-45# |
|
|
Packing: |
Carton and Wooden Case |
|
Bearing: |
C&U Bearing |
|
Seal: |
KSK |
|
Warranty: |
12Months |
|
Input Power: |
0.12kw~15kw |
|
Usages: |
Industrial Machine: Food Stuff, Ceramics, Chemical, Packing, Dyeing, |
|
IEC Flange: |
B5 |
|
Lubricant: |
Synthetic&Mineral |
1. Smooth transmission, low vibration, impact and noise, large reduction ratio, wide versatility, and can be used with various mechanical equipment.
2. A large transmission ratio can be obtained with a single-stage transmission, and the structure is compact. Most types of reducers have better self-locking properties, and can save braking devices for mechanical equipment with braking requirements
3. The meshing friction loss between the worm thread and the worm gear tooth surface is relatively large, so the transmission efficiency is lower than that of the gear, and the heat capacity and temperature are higher.
4. Higher requirements for lubrication and cooling.
5. Good interoperability. Worm gears and worms are manufactured according to national standards, and standard parts such as bearings and oil seals are used.
6. The box body type has basic type (the box body is a vertical or horizontal structure with a foot plate) and type (the box body is a rectangular parallelepiped, with fixed screw holes on multiple sides, without a foot plate or an additional foot plate And other structural types)
The WP type worm gear reducer is developed on the basis of the WD reducer. The worm is made of 45# high-quality steel and processed by heat treatment. The turbine is made of tin bronze and has good wear resistance. Its load-bearing capacity More obviously, this reducer is widely used in relatively small equipment in various industries such as mining, lifting, transportation, chemical industry, light industry, etc. The applicable conditions of this reducer are as follows: the sliding speed of the turbine is not more than 7.5m/s; high speed The speed of the shaft is not more than 1500 rpm. The working environment temperature is -40C^40C, and it can run in both directions.
Q: How can I know the product is suitable for me?
A: >1ST confirm drawing and specification >2nd test sample >3rd start mass production.
Q: Can I come to your company to visit?
A: Yes, you are welcome to visit us at any time.
Q: How shall we contact you?
A: You can send inquiry directly, and we will respond within 24 hours.
Hot Tags: worm gearbox with shaft, China, manufacturers, suppliers, wholesale, customized, quotation, low price, nmrv worm gearbox, drill speed reducer, High Efficiency Worm Gearbox WPWDKS 175, WPA60 Cast Iron Gearbox, Worm Gearbox Speed Reducer WPWDA 60, Worm Gearbox Speed Reducer WPWDO 70，WP Series Shaft Mount Cast Iron Worm Speed Reducer