We can offer customers a wide range of sizes and series speed reducers, we can also be customized according to customer requirements. And expressly, our price is very competitive because we are manufacturer, we own the source. Hope that we can serve you with our professional experience from now on.Whatsapp/wechat : 8618015057952 ,
We are a professional manufacturer with 10 years’ experience, welcome for the inquiry and visiting.
Features:
1. Different variants, both input and output shafts can be mounted horizontally or vertically
2. Compact structure
3. Direct drive or indirect drive available
4. Output could be solid shaft or hollow hole
Models & Variants:
WPA Series – Lower Input Shaft
WPS Series – Upper Input Shaft
WPDA Series – Lower Input Flange
WPDS Series – Upper Input Flange
WPO Series – Vertical Upward Output Shaft
WPX Series – Vertical Downward Output Shaft
WPDO Series – Vertical Upward Output Shaft, Input Flange
WPDX Series – Vertical Downward Output Shaft, Input Flange
Gearbox Parameters:
|
Type: |
Gearbox WPWX |
|
Model: |
WPWX40-250 |
|
Ratio: |
10-60 |
|
Color: |
Blue/Green Or On Customer Request |
|
Material: |
Housing: Die-Cast Iron cast |
|
Worm Gear-Copper-9-4# |
|
|
Worm-20CrMn Ti with carburizing and quenching, surface harness is 56-62HRC |
|
|
Shaft-chromium steel-45# |
|
|
Packing: |
Carton and Wooden Case |
|
Bearing: |
C&U Bearing |
|
Seal: |
KSK |
|
Warranty: |
12Months |
|
Input Power: |
0.12kw~15kw |
|
Usages: |
Industrial Machine: Food Stuff, Ceramics, Chemical, Packing, Dyeing, |
|
IEC Flange: |
B5 |
|
Lubricant: |
Synthetic&Mineral |
installation method:
Correct installation is an important part of ensuring the normal operation of mechanical equipment during the use and maintenance of the reducer. Therefore, when you install the reducer, be sure to assemble and use it in strict accordance with the following installation items.
1. Before installation, confirm whether the motor and reducer are intact, and strictly check whether the dimensions of the parts connecting the motor and the reducer are matched. Here are the dimensions and tolerances of the positioning boss of the motor, the input shaft and the groove of the reducer.
2. Unscrew the screw on the dust-proof hole on the outer side of the reducer flange, adjust the clamping ring to align the side hole with the dust-proof hole, and insert the hexagon socket to tighten. After that, remove the motor shaft key.
3. Connect the motor and the reducer naturally. When connecting, it must be ensured that the concentricity of the output shaft of the reducer and the input shaft of the motor is the same, and the outer flanges of the two are parallel. If the concentricity is inconsistent, it will cause the motor shaft to break or the reducer gear to wear.
Hot Tags: worm gearbox with shaft, China, manufacturers, suppliers, wholesale, customized, quotation, low price, nmrv worm gearbox, drill speed reducer, High Efficiency Worm Gearbox WPWDKS 175, WPA60 Cast Iron Gearbox, Worm Gearbox Speed Reducer WPWDA 60, Worm Gearbox Speed Reducer WPWDO 70，WPWX Worm Gear Speed Reducer